Poznaj szczegóły Naszych kursów

We train and examine welders. We have a certificate issued by the Welding Institute in Gliwice, an examiner appointed by the examiner Institute and an excellent staff of lecturers and instructors. Our welding courses are conducted in accordance with the guidelines of the Welding Institute, and the exams meet the requirements of the currently applicable standards.

We organize welding trainings with fillet welds, butt welds of plates and butt welds of pipes. All training and welding courses end with an exam that grants the qualifications of Qualification Societies, such as:

  • Bureau Veritas – BV
  • Instytutu Spawalnictwa w Gliwicach – IS
  • Technischer Überwachungsverein – TÜV SÜD

After completing the course / training, we help you find a job.

What courses do we offer?

For fitters

Plasma cutting of metals and electrical bonding of metals
– 56 hours of course – approximately 7 days

Gas cutting of metals and electric tacking of metals
– 56 hours of course – approximately 7 days

Ship hull fitter course
– 32 hours of the course – about 4 days of individual lessons with an instructor

Ship pipeline fitter course
– 32 hours of the course – about 4 days of individual lessons with an instructor

Cutting machine operation course
– 80 hours of the course, about 10 days of individual lessons with an instructor

Isometric drawing reading course
– 32 hours of the course – about 4 days of individual lessons with an instructor

For welders

Welders’ training and examinations are conducted in the following welding methods:
111 – arc coated electrode MMA
135 – consumable electrode in active gas shield / solid wire MAG
136 – consumable electrode in active gas shield / MAG flux cored wire
138 – consumable electrode shielded with active gases / cored wire with a metal core
131 – consumable electrode shielded with inert gases MIG of aluminum alloys
141 – with a non-consumable electrode shielded by inert gases TIG (141)

Courses in all of the above-mentioned methods are conducted at 3 levels of advancement:

– basic course – welding fillet welds (P / T FW)
– post-elementary course (stage 1) – welding of butt welds of metal sheets (P BW)
– post-elementary course (stage 2) – welding of butt welds of pipes (T BW)

Training can be conducted on the following materials:

– unalloyed steels (group 1, 2, 3, 5, 6, 7, 9, 11 according to CR EN 15608)
– alloy steels, stainless (group 8 according to CR EN 15608) and duplex (group 10 according to CR EN 15608)
– aluminum alloys (group 21 to 23 according to CR EN 15608)
– nickel alloys (group 41 to 48 according to CR EN 15608)

TRAINING CO-FINANCED WITH THE EU

The project is implemented by MROZEK MACIEJ „EKSPERT” under the Regional Operational Program of the Pomeranian Voivodeship for 2014-2020, Priority Axis 05. Employment, Measure 05.05 Lifelong learning.

The project is co-financed by the European Union under the European Social Fund.

Project implementation period: from 01/05/2017 – 31/12/2018

Supported area: Pomorskie voivodeship – poviats: Bytów, Chojnicki, Człuchowski, Kościerzyna, Kwidzyński, Lębork, Malbork, Nowodworski, Puck, Słupsk, Stargard, Wejherowo, Sztumski, Czerski.

Purpose of the project

Acquisition, supplementation or improvement of professional qualifications by 300 (21F, 279M) people of the working age, from areas with high unemployment rate in the Pomeranian Voivodeship, in the profession of a metal construction fitter.

target group

The target group is 300 people:

at the age of professional activity (18 years and older),
interested in acquiring, supplementing or improving professional qualifications on their own initiative,
from areas with a high unemployment rate in the Pomeranian Voivodeship (they study / work or live in an area with a high unemployment rate in the Pomeranian Voivodeship within the meaning of the provisions of the Civil Code),
with maximum upper secondary education,
including people with disabilities.

Persons with disabilities may take part in the project if they meet the requirements of the Acts and Regulations and receive the consent of a doctor to perform the profession of a welder.

Support

Support under the Project will be provided in the following forms:

training for 240 Project Participants qualifying as part of the profession of a metal construction fitter, allowing them to obtain the following qualifications:
course for a sheet and pipe welder with fillet welds using the MAG 135 method (20 groups x 12 people)
manual gas and plasma cutting course (20 groups x 12 people)
trainings increasing the qualifications of a metal structure fitter for 60 Project Participants who have qualifications in the field of a metal structure fitter, including:
manual gas and plasma cutting course (5 groups x 12 people);
thermal straightening course for steel structures (5 groups x 12 people);
training in electro-air gouging of welds (5 groups x 12 people).

Project participants will take part in courses and training conducted as part of the project in accordance with their qualifications.

Planned effects:

The main result of the project will be:

300 people (21F, 279M) who will complete vocational courses – granting or increasing qualifications as part of the profession of a metal construction fitter.
Planned products:
24 people aged 50 and more supported by the Program (1 F, 23 M),
241 people aged 25 and more supported by the Program (17 F, 224 M),
300 low-skilled people supported by the Program (21F, 279M),
50 micro, small and medium-sized enterprises whose employees were supported under the Program.

 

Project value: PLN 1,272,648.00
Contribution of European Funds: PLN 1,081,750.80

Ladies and Gentlemen!

We are pleased to announce that we are starting recruitment for the project
„Metal construction fitter – qualifications to use modern technologies”
The recruitment will last until the required number of Participants is qualified to participate in the Project.

The condition for participation in the recruitment procedure is to read the Regulations for recruitment and participation in the project, accept all its provisions and submit the application documents to the project office.

A person who meets all of the following criteria may become a Project Participant:

is a person of working age (over 18 on the date of joining the project),
is interested in acquiring, supplementing or improving professional qualifications on its own initiative,
has no more than upper secondary education (a person with low qualifications),
studies / works or lives within the meaning of the provisions of the Civil Code in the area with a high unemployment rate of the Pomeranian Voivodeship (poviats: Bytowski, Chojnicki, Człuchowski, Kościerski, Kwidzyński, Lęborski, Malborski, Nowodworski, Puck, Słupski, Starogard, Sztumski, Wejherowski, Tczewski) .

Persons with disabilities may participate in the project if they meet the requirements of the Acts and Regulations and receive a doctor’s consent to perform the profession of a metal construction fitter.

 

People interested in participating in the project, meeting the above criteria, are invited to complete the online application form or to contact an employee of the Project Office.

Copyright Welders Factory © 2022 All Rights Reserved
Created by DANET Władysławowo 

Telefon: 510-167-686

office@weldersfactory.com